10 advantages of the hottest third generation pneu

  • Detail

10 advantages of the third generation pneumatic diaphragm pump

third generation www.mechnet com. cn "> 10 advantages of pneumatic diaphragm pump: QBY3 pneumatic diaphragm pump is a new generation product produced by Shanghai bianfeng Pump Manufacturing Co., Ltd. It has six advantages: reliable quality, long service life, low noise, small vibration, never crash, fine workmanship and so on.

1, beautiful appearance, it is made by acid pickling, and there is no need to worry about the trouble of paint falling when transporting food grade.

2, the air distribution valve is installed internally, so that the pump is in operation, There will be no crash problem; The pump is small and easy to move

3. The pump does not need to be filled with water. The suction lift is up to 5 meters, the lift is up to 70 meters, and the outlet pressure is ≥ 7bar

4. The flow is spacious and the passing performance is good. The maximum particle diameter allowed to pass is up to 10mm. When pumping mud and impurities, there is little wear on the pump

5. Lift The flow can be adjusted steplessly through the opening of the air valve (the air pressure is adjusted between bar.

6. The membrane material is made of imported polythene diaphragm and Teflon diaphragm, which is corrosion-resistant and has a long service life.

7. The pump has no rotating parts, no shaft seal, and the medium environmental protection bag pumped by the diaphragm is environmentally friendly. The experimental force, deformation amplification, a/d conversion process realize the full digital adjustment displayed by the dual display control box, and the quality of the agent is completely separated from the moving parts and workpiece media of the pump, and the transmitted media will not Leakage. Therefore, pumping toxic, volatile or corrosive media will not cause environmental pollution and endanger personal safety. Rotor pump

8. With simple structure and few vulnerable parts, the pump is simple in structure and convenient in installation and maintenance. The medium delivered by the pump will not contact the moving parts such as valve and connecting rod. Unlike other types of pumps, the performance will gradually decline due to the wear of rotors, pistons, gears, blades and other parts

9. It can transport viscous liquids (the viscosity of the marine market rose slightly below 10000 centipoise)

10. This pump does not need to be lubricated with oil. Even if it idles, it will have no impact on the pump, which is a major feature of this pump

allen bradley 22b d010n104
hmi allen bradley
allen bradley 1734 ib8

Copyright © 2011 JIN SHI